Just around the corner…..culture…

When going out for groceries, or a drink or to the Railway station, we walk over a pedestrian bridge and are always greeted by Monet’s Blue House. Monet must have liked Zaandam as much as we do since he did 25 paintings and 9 drawings.
The one we see pretty much every time we walk is the blue house.

The side was painted over, and in 2014 the blue side was restored to the original color.

Here is the current view…

Monet in Zaandam. Zaans Museum.

Today was also working on finishing the water tank system. Last year I installed the 2nd water tank together with Remy, and discovering 2 days later I also created a Hernia.
So this year it is finishing the system. Both tanks have the water withdraw from the top, so there is no possibility of valves leaking on the tank. (They can leak further in the piping system)
I bought on Ebay a set of 24VDC electric valves 3/4″, which are going to control each tank and the inlet valve. This way I can use the tanks also to level the barge, and when a full float signal happens, I can automate the fill valve to close.

Had to buy a water level sensor, boy are they expensive. 125E for a 65 cm one. The port tank was empty …yeahhh… so it was quite easy to get the sensor and the outflow valve installed. Remember, last year Lars made a bigger hatch in the front so I could easily drop these tanks. Well last year Remy and I also found out that the ‘rough’ size of the hatch was perfect. BUT in order to divert rain water a U profile was welded on the inside, making the opening smaller!!
Meaning we had to disassemble the wall cabinets and get the tanks in via the big hatch. No wonder I developed a hernia! Thanks Lars!

Valve setup

When I was under in the front locker, I did saw 2 thin electrical lines and hoped they ended in the engine room, so I could use them for sensor level readings. Unfortunately, these line played a vanishing act. Thus I needed to pul another set, or a pair of 4 lines newly. Luckily the previous owner had made a few extra conduit runs for electrical lines in the wall, so I started feeding the ‘fishing line’ into an empty conduit, and after a bunch of meters it stopped. Crawled in the front locker and did not see the fishing line, so it must be behing the water tank ( which is full). So first I had to again disassemble part of the wal storage closet, and was able to remove the hatch dividing the living area with the front hatch. But there was this big blue heavy water tank, which silently was not budging. Looking with a mirror to the conduit I saw it made a few corners, so the fishing line must got stuck there. Following the conduit from inside the front locker, I found it empty terminated. Thus I started pulling parts of that conduit out, fighting the dutch tape which was mounted on each junction. Finally all came loose and the fishing tape revealed itself. So we now have a clear sensor line in a conduit.

For the Intercom/PA system I need to run loudspeaker wire to the front. On the port side there is a conduit with loudspeaker wire, but helas it was cut somewhere half way, so I ordered me 1.5 mm loudspeaker wire ( the PA system is 40 Watt) and once that is here I will pull the sensor line and the loudspeaker wire.

One thought on “Just around the corner…..culture…

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s