A quiet day, basically a resting day, lounging, sleeping, a bite, more sleep, did some cleaning up wiring at the inverters.
Picture of the cable mess
Installed a outlet which is connected to the shore power, so if the inverter would give troubles, it could be bypassed with a cable. Since the power has to be the correct polarity, I marked the plug with a yellow paint dot. The plug was a plug where the cord comes from the side so basically a one way fit. Then later I learned from Daniel, that i should have used the shore power connectors, aaargh…so I am not going to install the output of the inverter the same way.
Cleaned the top of the boat.